Introducing JoyeTech’s first 150W mod, the Cuboid features a variable temerature control system. Powered by (2) user replaceable 18650 batteries (batteries sold separately), cells are easily replaced by removing the new slip-open cover. A large 0.96 inch OLED screen dispays important settings in a bright and organized manner. The Cuboid accepts many different types of wires for temperature control mode. These wires are nickel, titanium, and stainless steel and can be read by the Cuboid all the way down to 0.05Ω.
Cuboid, applies Variable Temperature Control system with firmware V3.0 and 150W output, having Temp-SS316 and customized TCR available now.
It is powered by two replaceable 18650 cells with the new slip-open cover.
Multiple colors, 0.96-inch OLED screen and the new dual-battery bar display make it more practical and attractive catering to your preference.
Upgradeable firmware enables it always up-to-date. Now you can upgrade your Cuboid to 200W via VT Software.
1 * Cuboid (no cell)
1 * USB Cable
1 * Manual
1 * Warranty Card
150W Output and Dual Battery Bar
Cuboid uses two replaceable batteries with the new dual battery bar.
The maximum output can be reached to 150W, making it powerful and convenient.
We kindly recommend high-rate 18650 cells with rated discharge current≥25A.
New Slip-open Cover and Battery Reverse Polarity Protection
The new slip-open cover on the bottom enables you change your battery swiftly by pulling the slider over.
With the Onboard Reverse Polarity Protection, it will protect the device from damage in the event of reverse battery installation.
Please pay attention to the positive and negative terminal signs when installing new batteries.
Cuboid comes with the upgradeable firmware.
Having Version 3.00 for Cuboid, Temp-SS316 and TCR are available now.
Newly added SMART Mode in Version 3.01 and 3.11
Temp-SS316 ModeBased on the previous Temp-SS mode, we developed the new Temp-SS316 mode.
We kindly recommend you using Joyetech BF-SS316 atomizer heads (0.5ohm/1.0ohm).
Customized TCR Available
Cuboid enables you to adjust TCR values for different materials,
thus further improving the accuracy of temperature control and bringing you the great taste.
There are three options (M1, M2, M3) for you to customize the TCR regarding to the material.
In power-off condition, press the fire button and the right regulator simultaneously for around 5 seconds, then you enter into the TCR set menu:
And here’s the TCR Value Range for your reference:
Exquisite 510 Stainless Steel Thread Applied with 510 stainless steel thread and wide border fitting for large capacity atomizers.
Charging & Upgrading
We kindly suggest you take out the cells and charge them with a separate charger.
The micro USB port is on the top of the left side. Connect it with a micro USB cable to charge or upgrade your device.
The Vaporesso Attitude is only 111mm x 48mm x 25mm in size, it weighs 125g and it will fire as low as 0.05ohm. The Vaporesso Attitude is made from zinc alloy and powered by single 18650 battery. This mod is surely is tiny but has a lot of MIND-BOGGLING temp control functions with a total of six output modes. The Vaporesso Attitude’s advanced OMNI board can supply:
Variable Wattage – NiChrome, Stainless Steel, and Titanium
TCR modeBYPASS mode/CCW/CCT/SMART mode.
CCW (Customized Curve of wattage)
CCT (Customized Curve of temperature)
At the top, you’ve got a spring loaded 510 connection and its unique curvy design that can only accommodate 22 – 23mm sub ohm tanks. Keep in mind that this mod can’t accommodate much bigger tanks like with 25mm in diameter because of its curvy edge.
On each side, you have nice venting holes for your battery. The magnetic battery door is so strong that it cannot easily fall off, and I haven’t heard any rattling sound from it at all. At the bottom side, you can find the USB charging port which can also be an updated port for software updates which I think is AVAILABLE on their website.
The Vaporesso Estoc Tank or commonly known for its EUC (Eco Universal Coil) is the FIRST sub ohm tank that features this extraordinary coils. While you are vaping with Estoc tank, you could change the coil outside of the chamber even on a full tank. Therefore saving you time and money, all at once. Although the Estoc Tank is small in size, its core heating element is as powerful as any full atomizer head and capable of performing on a wide settings range.
The OMNI chipset of the Attitude Mod feels intimidating at first use. I admit that with all the functions that are embedded on this chipset, it may take few weeks for me to get used to it. But what I really like about this device is its “smart mode” feature. I think it’s the coolest feature in a mod that I’ve ever seen so far. What it does is it automatically recommends you the ideal output wattage for your tank. I think this feature is an ideal for new use tanks because you haven’t still figure out the best wattage to vape it, right? Although sometimes the recommended wattage may not be the perfect one, at least its a good starting point, and from there you can just play and test the best wattage for your tank. It’s easy to adjust and it takes less effort.
Regarding the Vaporesso Estoc Tank, it is the latest and maybe one of the best sub-ohm tanks I reviewed so far. So don’t forget to check out my review about this tank . On the Contrary, I can’t really tell the same way for the mod. Yes, I admit the smart mode feature on the OMNI chipset is dope but the other extra feature feels like gimmicky for me. Perhaps this may be helpful to some connoisseurs who likes to play and mess up their settings but for a person like me who’s contented with a wattage mode (which most people will agree with me on this) these extra features are not necessary. Most of it are just complex settings that not everyone will understand.
Asvape Michael VO200 TC Mod Devils Night Edition is the most luxurious and unique VO200 mod out there. You may not strange to VO chip set because you must heard of BMI, the Michael Mod is using the latest VO200 chip set. Asvape Michael mod is equally luxurious, made out of zinc alloy like most mods but covered by real carbon fiber. Whole designs come from Ferrari sports car designer idea, you can find his signature is on the mod top.Powered by dual 18650 batteries, the output wattage can be 200W. The output mods OUT DIY, TC, VW and Bypass bring fantastic vaping experience.
UD Balrog Mod 70 W TC Kit The Balrog 70W TC Kit is made by Youde who are well known for their popular rebuildable atomizers and tanks. The Balrog 70W TC Kit features the Balrog Mod which can fire up to 70 watts and has the ability to fire Ni200 (Nickel) and Titanium wire using the built-in temperature control feature
1 * PIn eGo ONE
1 * eGo ONE Atomizer
2 * eGo ONE CL Atomizer Head (0.5 / 1.0ohm)
1 * eGo ONE Atomizer cơ sở
1 * eGo ONE ống ngậm (kim loại)
1 * eGo ONE ống ngậm (thủy tinh hữu cơ)
1 * Cáp USB
1 * Sách hướng dẫn sử dụng và thẻ bảo hành
1 * Adapter (1A)
oye eVic-VTC 75W Mini with TRON Tank Joyetech is back with the updated version of the original eVic-VT which is called the eVic-VTC Mini. The eVic-VTC Mini is portable and much more compact compared to it’s previous iteration