We proudly present to you the Plaque 150W Mod! The Plaque features deep, high quality engravings through the body of the mod with a amazingly vibrant finish. The Plaque requires 2x 18650 sized batteries (not included) to power the device and has a maximum power output of 150 watts!
The Plaque is powered by a GX-150-HF chip which grants the device power saving capabilities as well as a “flavor taste” boosting mode which enhances flavor.
Technical Specifications. Chipset: Asmodus GX150
Wattage Range(VW Mode): 5.0w-150w
Wattage Range(TC Mode): 5.0w-80w
Atomizer Ohm Range: .1ohm-2.5ohm
TC Control Range:212F-572F (100C-300C)
Supports Upgradeable Firmware
Balance Charge Function
Charging Parameters: DC 5V/1A
Max Output Voltage: 8.4v
Output Peak Current: 35.0 amps
Input Voltage Range: 6.4v-8.4v
Display Operating Current: 25mA
Standby Current: <350uA
Standby Time: 10s
Vaping Time: 10s
Work Efficiency: 94%
1 * PIn eGo ONE
1 * eGo ONE Atomizer
2 * eGo ONE CL Atomizer Head (0.5 / 1.0ohm)
1 * eGo ONE Atomizer cơ sở
1 * eGo ONE ống ngậm (kim loại)
1 * eGo ONE ống ngậm (thủy tinh hữu cơ)
1 * Cáp USB
1 * Sách hướng dẫn sử dụng và thẻ bảo hành
1 * Adapter (1A)
Introducing JoyeTech’s first 150W mod, the Cuboid features a variable temerature control system. Powered by (2) user replaceable 18650 batteries (batteries sold separately), cells are easily replaced by removing the new slip-open cover. A large 0.96 inch OLED screen dispays important settings in a bright and organized manner. The Cuboid accepts many different types of wires for temperature control mode. These wires are nickel, titanium, and stainless steel and can be read by the Cuboid all the way down to 0.05Ω.
The Vaporesso Attitude is only 111mm x 48mm x 25mm in size, it weighs 125g and it will fire as low as 0.05ohm. The Vaporesso Attitude is made from zinc alloy and powered by single 18650 battery. This mod is surely is tiny but has a lot of MIND-BOGGLING temp control functions with a total of six output modes. The Vaporesso Attitude’s advanced OMNI board can supply:
Variable Wattage – NiChrome, Stainless Steel, and Titanium
TCR modeBYPASS mode/CCW/CCT/SMART mode.
CCW (Customized Curve of wattage)
CCT (Customized Curve of temperature)
At the top, you’ve got a spring loaded 510 connection and its unique curvy design that can only accommodate 22 – 23mm sub ohm tanks. Keep in mind that this mod can’t accommodate much bigger tanks like with 25mm in diameter because of its curvy edge.
On each side, you have nice venting holes for your battery. The magnetic battery door is so strong that it cannot easily fall off, and I haven’t heard any rattling sound from it at all. At the bottom side, you can find the USB charging port which can also be an updated port for software updates which I think is AVAILABLE on their website.
The Vaporesso Estoc Tank or commonly known for its EUC (Eco Universal Coil) is the FIRST sub ohm tank that features this extraordinary coils. While you are vaping with Estoc tank, you could change the coil outside of the chamber even on a full tank. Therefore saving you time and money, all at once. Although the Estoc Tank is small in size, its core heating element is as powerful as any full atomizer head and capable of performing on a wide settings range.
The OMNI chipset of the Attitude Mod feels intimidating at first use. I admit that with all the functions that are embedded on this chipset, it may take few weeks for me to get used to it. But what I really like about this device is its “smart mode” feature. I think it’s the coolest feature in a mod that I’ve ever seen so far. What it does is it automatically recommends you the ideal output wattage for your tank. I think this feature is an ideal for new use tanks because you haven’t still figure out the best wattage to vape it, right? Although sometimes the recommended wattage may not be the perfect one, at least its a good starting point, and from there you can just play and test the best wattage for your tank. It’s easy to adjust and it takes less effort.
Regarding the Vaporesso Estoc Tank, it is the latest and maybe one of the best sub-ohm tanks I reviewed so far. So don’t forget to check out my review about this tank . On the Contrary, I can’t really tell the same way for the mod. Yes, I admit the smart mode feature on the OMNI chipset is dope but the other extra feature feels like gimmicky for me. Perhaps this may be helpful to some connoisseurs who likes to play and mess up their settings but for a person like me who’s contented with a wattage mode (which most people will agree with me on this) these extra features are not necessary. Most of it are just complex settings that not everyone will understand.
UD Balrog Mod 70 W TC Kit The Balrog 70W TC Kit is made by Youde who are well known for their popular rebuildable atomizers and tanks. The Balrog 70W TC Kit features the Balrog Mod which can fire up to 70 watts and has the ability to fire Ni200 (Nickel) and Titanium wire using the built-in temperature control feature
Asvape Michael VO200 TC Mod Devils Night Edition is the most luxurious and unique VO200 mod out there. You may not strange to VO chip set because you must heard of BMI, the Michael Mod is using the latest VO200 chip set. Asvape Michael mod is equally luxurious, made out of zinc alloy like most mods but covered by real carbon fiber. Whole designs come from Ferrari sports car designer idea, you can find his signature is on the mod top.Powered by dual 18650 batteries, the output wattage can be 200W. The output mods OUT DIY, TC, VW and Bypass bring fantastic vaping experience.
oye eVic-VTC 75W Mini with TRON Tank Joyetech is back with the updated version of the original eVic-VT which is called the eVic-VTC Mini. The eVic-VTC Mini is portable and much more compact compared to it’s previous iteration